AirWard's Parking Brake Kit - with PVPV-D Valve (NO Cable)

VERY IMPORTANT: The Kits were originally developed for the Van's RV-10 and are adaptable to any Experimental Aircraft with Left and Right Braking.  The Adapter is designed to accommodate the MATCO PVPV-D Parking Brake Valve.  The only differances between the Experimental Aircraft are the Type and Size of the Brake Lines between the Master Cylinders and the top of the Main Gear Legs. To ensure we ship the proper Fittings for the Parking Brake Valve (they require 1/8" NPT Fittings) - indicate what material you plan to use - Aluminum or Plastic (Nylon) - and the outside diameter of the lines (usually 1/4" OD).  Also, indicate if you require Straight, 45' or 90' Degree Fittings - and how many of each.  When ordering - note this information in the NOTES Section of the Order Form along with the type of Experimental Aircraft. 

You will want to stop and hold your aircraft for any of the following reasons:

Now available from a RV-10 builder. The Kit includes:

• Machined adapter that mounts in the same holes as brake line bracket, F-6172-1 (RV-10 only);
• Hydraulic fittings (4) for Parking Brake Valve (no plumbing changes required);
• All bolts, nuts, washers, nutplates, screws, rivets and clamps included.

Photo Shows "Cable" - Not Included in this Kit.